135In This ChapterNetwork Settings ...................................................................................135Device Services .....................................................................................140Configuring Modem Settings .................................................................148Configuring Date/Time Settings ............................................................149Event Management ...............................................................................151Power Supply Setup ..............................................................................157Configuring Ports ...................................................................................158Port Group Management .......................................................................194Network SettingsUse the Network Settings page to customize the network configuration(for example, the IP address, discovery port, and LAN interfaceparameters) for your KX II.There are two options available to set up your IP configuration: None (default) - This is the recommended option (static IP). Sincethe KX II is part of your network infrastructure, you most likely do notwant its IP address to change frequently. This option allows you toset the network parameters. DHCP - With this option, the IP address is automatically assigned bya DHCP server.To change the network configuration:1. Choose Device Settings > Network. The Network Settings pageopens.2. Update the Network Basic Settings. See Network Basic Settings.3. Update the LAN Interface Settings. See LAN Interface Settings.4. Click OK to set these configurations. If your changes requirerebooting the device, a reboot message appears.To reset to factory defaults: Click Reset to Defaults.Note: Both IPv4 and IPv6 addresses are supported.Chapter 8 Device Management
