Chapter 8: Device Management159Port type DescriptionPowerStrip(rack PDU)Power strip connectedVM Virtual media CIM (D2CIM-VUSB andD2CIM-DVUSB)Blade Chassis Blade chassis and the blades associatedwith that chassis (displayed in ahierarchical order)2. Click the Port Name for the port you want to edit. For KVM ports, the Port page for KVM and blade chassis ports isopened. For rack PDUs, the Port page for rack PDUs (power strips) isopened. From this page, you can name the rack PDUs and theiroutlets.Configuring Standard Target ServersTo name the target servers:1. Connect all of the target servers if you have not already done so.See Step 3: Connect the Equipment for a description of connectingthe equipment.2. Choose Device Settings > Port Configuration. The Port Configurationpage opens.3. Click the Port Name of the target server you want to rename. ThePort Page opens.4. Assign a name to identify the server connected to that port. Thename can be up to 32 characters, and alphanumeric and specialcharacters are allowed.5. Select Standard KVM Port as the subtype for the port.6. In the Target Settings section, select 720x400 Compensation if youare experiencing display issues when the target is using thisresolution.7. Select 'Use international keyboard for scan code set 3' if connectingto the target with a DCIM-PS2 and require the use of scan code set 3with an international keyboard.
