Chapter 8: Device Management138Enabling SSHEnable SSH access to allow administrators to access the Dominion KX IIvia the SSH v2 application.To enable SSH access:1. Choose Device Settings > Device Services. The Device ServiceSettings page appears.2. Select Enable SSH Access.3. Enter the SSH Port information. The standard SSH TCP port numberis 22 but the port number can be changed to provide a higher level ofsecurity operations.4. Click OK.HTTP and HTTPS Port SettingsYou are now able to configure HTTP and/or HTTPS ports used by theDominion KX II. For example, if you are using the default HTTP port 80for another purpose, changing the port will ensure the Dominion KX IIdoes not attempt to use it.To change the HTTP and/or HTTPS port settings:1. Choose Device Settings > Device Services. The Device ServiceSettings page appears.2. Enter the new ports in the HTTP Port and/or HTTPS Port fields.3. Click OK.Entering the Discovery PortThe Dominion KX II discovery occurs over a single, configurable TCPPort. The default is Port 5000, but you can configure it to use any TCPport except 80 and 443. To access the Dominion KX II from beyond afirewall, your firewall settings must enable two-way communicationthrough the default Port 5000 or a non-default port configured here.To enable the discovery port:1. Choose Device Settings > Device Services. The Device ServiceSettings page appears.2. Enter the Discovery Port.3. Click OK.
