Appendix A: Specifications269If a connection to the target is in place from the other Dominion KX II, theavailability is checked when a connection is attempted. Access is deniedor allowed consistent with the PC-Share policy in place for the DominionKX II. Until that time, the availability is not be updated on the otherDominion KX II.If access is denied because the target is busy, a notification is displayed.Working from CC-SGOperations initiated from CC-SG are based on the Status, Availabilityand CIM name reported by the managed Dominion KX II. When thetarget is connected to two managed Dominion KX IIs and the devices areadded to CC-SG, two nodes will be created. Each node will have its ownoob-kvm interface associated with it. Alternatively, a single node can beconfigured with an oob-kvm interface from each Dominion KX II.If the Dominion KX IIs are configured for „Private‟ mode, when a secondconnection is attempted the user is notified that they cannot connect andaccess is denied.When a port name change is initiated via the CC-SG Port Profile pane,the changed name is pushed to the managed Dominion KX II. Thecorresponding port name of the other Dominion KX II will not be updatedin CC-SG until a connection is attempted to the target port via the otherDominion KX II‟s oob-kvm interface.Dominion KX II to Paragon II GuidelinesThe P2CIM-APS2DUAL or P2CIM-AUSBDUAL can be connected to aDominion KX II and Paragon II.Concurrent AccessBoth the Dominion KX II and Paragon II must be configured with thesame policy for concurrent access to targets.Paragon IIoperationmodeMode description Supported?Private A server or other deviceon a specific channelport can be accessedexclusively by only oneuser at a time.Supported.Both Paragon II and theDominion KX II must be setto Private. The Privatesetting is applied on toDominion KX II device, notper user group.The Paragon II uses Red toindicate „busy‟ or Green to
