Chapter 3: Working with Target Servers502. Click the Delete button. The favorite is removed from your list offavorites.Note: Both IPv4 and IPv6 addresses are supported.Logging OutTo quit the Dominion KX II Remote Console: Click Logout in the upper right-hand corner of the page.Note: Logging out also closes any open Virtual KVM Client and serialclient sessions.Proxy Server Configuration for use with Dominion KX II, MPC, VKC andAKCWhen the use of a Proxy Server is required, a SOCKS proxy must alsobe provided and configured on the remote client PC.Note: If the installed proxy server is only capable of the HTTP proxyprotocol, you will not be able to connect.To configure the SOCKS proxy:1. On the client, select Control Panel > Internet Options.a. On the Connections tab, click 'LAN settings'. The Local AreaNetwork (LAN) Settings dialog opens.b. Select 'Use a proxy server for your LAN'.c. Click Advanced. The Proxy Settings dialog opens.d. Configure the proxy servers for all protocols. IMPORTANT: Do notselect 'Use the same proxy server for all protocols'.Note: The default port for a SOCKS proxy (1080) is different fromHTTP proxy (3128).2. Click OK at each dialog to apply the settings.3. Next, configure the proxies for Java™ applets by selecting ControlPanel > Java.e. On the General tab, click Network Settings. The Network Settingsdialog opens.f. Select Use Proxy Server.g. Click Advanced. The Advanced Network Settings dialog opens.h. Configure the proxy servers for all protocols. IMPORTANT: Do notselect 'Use the same proxy server for all protocols'.
