Appendix C: Informational Notes2982. Either comment out this line (using #) or delete it completely.3. Restart the X server.With this change, the internal video mode timing from the X server will beused and will correspond exactly with the VESA video mode timing,resulting in the proper video display on the Dominion KX II.Supported Video Resolutions Not DisplayingWhen using a CIM, there are some video resolutions, as listed inSupported Video Resolutions (on page 274), that may not be availableto you for selection by default.To view all available video resolutions if they do not appear:1. Plug the monitor in.2. Next, unplug the monitor and plug in the CIM. All video resolutionswill not be available and can be used.USB Ports and ProfilesVM-CIMs and DL360 USB PortsHP® DL360 servers have one USB port on the back of the device andanother on the front of the device. With the DL360, both ports cannot beused at the same time. Therefore, a dual VM-CIM cannot be used onDL360 servers.However, as a workaround, a USB2 hub can be attached to the USB porton the back of the device and a dual VM-CIM can be attached to thehub.Help for Choosing USB ProfilesWhen you are connected to a KVM target server in VKC, you can viewinformation about USB profiles via the Help on USB Profiles commandon the USB Profile menu.
