Chapter 3: Working with Target Servers51Note: The default port for a SOCKS proxy (1080) is different fromHTTP proxy (3128).4. If you are using standalone MPC, you must also do the following:i. Open the start.bat file in MPC directory with a text editor.j. Insert the following parameters to the command line. Add thembefore "-classpath": -DsocksProxyHost=<socks proxy ip addr>-DsocksProxyPort=<socks proxy port>The parameters should look as follows:start javaw -Xmn128M -Xmx512M -XX:MaxHeapFreeRatio=70-XX:MinHeapFreeRatio=50 -Dsun.java2d.noddraw=true-DsocksProxyHost=192.168.99.99 -DsocksProxyPort=1080-classpath .\sdeploy.jar;.\sFoxtrot.jar;.\jaws.jar;.\sMpc.jarcom.raritan.rrc.ui.RRCApplication %1Multi-Platform Client InterfaceRaritan Multi-Platform Client (MPC) is a graphical user interface for theRaritan product lines, providing remote access to target serversconnected to Raritan KVM over IP devices. For details on using MPC,see the KVM and Serial Access Clients Guide available on Raritan'swebsite on the same page as the user guide. Instructions on launchingMPC are provided there.Launching MPC from a Web BrowserImportant: Regardless of the browser you use, you must allowpop-ups from the Dominion device's IP address in order to openMPC.Important: Only Mac 10.5 and 10.6 with an Intel® processor can runJRE 1.6 and, therefore, be used as a client. Mac 10.4.11 and 10.5.8do not support MPC as a standalone client.1. To open MPC from a client running any supported browser, typehttp://IP-ADDRESS/mpc into the address line, where IP-ADDRESSis the IP address of your Raritan device. MPC will open in a newwindow.Note: The Alt+Tab command will toggle between windows only onthe local system.When MPC opens, the Raritan devices that were automaticallydetected and which are found on your subnet are displayed in theNavigator in tree format.2. If your device is not listed by name in the navigator, add it manually:a. Choose Connection > New Profile. The Add Connection windowopens.
