Chapter 3: Working with Target Servers52b. In the Add Connection window, type a device Description,specify a Connection Type, add the device IP address, and clickOK. These specifications can be edited later.3. In the Navigator panel on the left of the page, double-click the iconthat corresponds to your Raritan device to connect to it.Note: Depending on your browser and browser security settings, youmay see various security and certificate check and warning messages. Itis necessary to accept the options in order to open MPC.Note: If you are using Firefox 3.0.3, you may experience problemslaunching the application. If this occurs, clear the browser cache andlaunch the application again.Virtual KVM ClientOverviewWhenever you access a target server using the Remote Console, aVirtual KVM Client (VKC) window opens. There is one Virtual KVM Clientfor each target server connected. These windows can be accessed viathe Windows® task bar.Virtual KVM Client windows can be minimized, maximized, and movedaround your computer desktop.Note: Refreshing your HTML browser will close the Virtual KVM Clientconnection, so exercise caution.Note: If you are using Firefox 3.0.3, you may experience problemslaunching the application. If this occurs, clear the browser cache andlaunch the application again.Connecting to a KVM Target ServerTo connect to a KVM target server:1. From the Dominion KX II Remote Console, click the Port Access tabto open it. The Port Access page opens.2. Click the Port Name of the target you want to access. The PortAction menu appears.3. Click Connect. A Virtual KVM Client (on page 52) window opens tothe target server connected to that port.
