Chapter 2: Installation and Configuration32a. Primary DNS Server IP Addressb. Secondary DNS Server IP Address7. When finished, click OK. Your Dominion KX II device is now networkaccessible.See LAN Interface Settings (on page 135) for information in configuringthis section of the Network Settings page.Note: In some environments, the default LAN Interface Speed & Duplexsetting Autodetect (autonegotiator) does not properly set the networkparameters, which results in network issues. In these instances, settingthe Dominion KX II LAN Interface Speed & Duplex field to 100 Mbps/FullDuplex (or whatever option is appropriate to your network) addresses theissue. See the Network Settings (on page 132) page for moreinformation.Naming Target ServersTo name the target servers:1. Connect all of the target servers if you have not already done so.See Step 3: Connect the Equipment (on page 26) for a descriptionof connecting the equipment.2. Using the Dominion KX II Local Console, choose Device Settings >Port Configuration. The Port Configuration page opens.3. Click the Port Name of the target server you want to rename. ThePort Page opens.4. Assign a name to identify the server connected to that port. Thename can be up to 32 characters, and alphanumeric and specialcharacters are allowed.5. Click OK.Valid Special Characters for Target NamesCharacter Description Character Description! Exclamation point ; Semi-colon" Double quote = Equal sign# Pound sign > Greater than sign$ Dollar sign ? Question mark% Percent sign @ At sign& Ampersand [ Left bracket( Left parenthesis \ Backward slash
