10 RAYDATA Installation and Operation HandbookSiting of Depth Transducer (Standard Through Hull)The same mounting rules apply to the depth transducer as those listedon the previous page for the speed transducer.The depth transducer must be vertical to within 10°, forward, aft andathwart ships.10° MaxD6302.5 Transducer CablingThe depth and speed transducers are supplied with 32.5ft (10m) ofcable. These cables are fitted with female lug connectors that plugdirectly into the back of the RayData (see below).Allow some slack in the cables, so that the equipment can be serviced ifnecessary.Run the transducer cable back to the instrument. Avoid fluorescentlights, engines and radio transmitting equipment. The cables shouldalso be kept clear of the bilges and be secured at regular intervals.Note: Do not change the length of the depth transducer cable: thiswill affect the performance of the transducer. For furtherinformation, please contact Raymarine or an authorized Raymarineagent.
