Raymarine Raydata Installation And Operating Handbook
                                                                                       | |
Contents
| 
Chapter 5: Alarms 396. When you have set the value to the required number, pressÚÚÚÚÚ and ÙÙÙÙÙ together to exit to the Shallow Alarm page, with the newvalue set.7. If the alarm is off, press and hold ÚÚÚÚÚ and ÙÙÙÙÙ together for six secondsto turn it on. The current alarm value is displayed.If you do not wish to adjust the deep alarm limits, press DEPTH to returnto the Main Depth page.Adjusting the Deep Alarm LimitThe minimum and maximum alarm depths you can select, and theresolution of the alarms, depend on the units selected as follows:Units Minimum Maximum ResolutionDepth DepthFeet 10 400 Whole feetFathoms 2 50 Whole fathomsMetres 3 120 Whole metresThe deep alarm limit must also be greater than the shallow alarm limit.To adjust the deep depth alarm value:1. Unless you are continuing after setting the shallow alarm, followsteps 1 to 3 in the Shallow Alarm procedure (page 38).2. Press the ÙÙÙÙÙ key to display the Deep Alarm sub-page, showing thecurrent alarm limit, or ALARM OFF if the alarm is turned off. Totoggle the alarm between on and off, press and hold ÚÚÚÚÚ and ÙÙÙÙÙtogether for six seconds.3. Press ÚÚÚÚÚ and ÙÙÙÙÙ together. The Deep Alarm Adjust page isdisplayed.4. Adjust the value to the required setting, as described in step 5 in theShallow Alarm procedure (page 38).5. Press ÚÚÚÚÚ and ÙÙÙÙÙ together to set the value and return to the DeepAlarm page.6. If the alarm is off, press and hold ÚÚÚÚÚ and ÙÙÙÙÙ together for six secondsto turn it on. The current alarm value is displayed.Press DEPTH to return to the Main Depth page, or ÙÙÙÙÙ to move on tothe Anchor Alarm page. |
Related manuals for Raymarine Raydata
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine