40 RAYDATA Installation and Operation HandbookAdjusting the Anchor and Temperature Alarm LimitsThe anchor and temperature alarm thresholds are both set in the sameway. The anchor alarm is used in the example displays.For the anchor alarm, the minimum and maximum alarm depths youcan select, and the resolution of the alarms, are the same as for theshallow and deep alarms.For the temperature alarm, the range is 5 to 104°F (-10 to +40°C), with aresolution of 0.1°.To adjust the anchor or temperature alarm values:1. Display the appropriate alarm page:- For the anchor alarm, press ÙÙÙÙÙ from the Deep Alarm pagedescribed above, or ÚÚÚÚÚ from the Main Depth page.- For the temperature alarm, use the DEPTH key as many timesas required to display the Temperature page, and thenpress ÙÙÙÙÙ.D3048-1The page shows the current alarm limits, or ALARM OFF if thealarm is turned off. To toggle the alarm between on and off, pressand hold ÚÚÚÚÚ and ÙÙÙÙÙ together for six seconds.2. Press ÚÚÚÚÚ and ÙÙÙÙÙ together. The lower adjust page is displayed.D3070-1
