Chapter 6: The Display Pages 53Log/TripTo display this page, press SPEED from the Speed Through Waterpage.D3055-1This page shows the log (total distance travelled), and the distancetravelled on the current trip. The distance is in KM, SM, or NM,depending on the choice made in the Setup pages (see Chapter 4).You can reset the trip counter, but not the log. To reset the trip counter,press and hold ÚÚÚÚÚ and ÙÙÙÙÙ together for three seconds. While you holdthe keys down, the trip value flashes until the counter is reset to zero. Ifyou release the keys after less than three seconds, while the trip valueis still flashing, the trip will not be reset and the display will return tonormal.The Log counter continues to increase during the lifetime of theRayData, and cannot be reset except by a factory reset (see page 63).The maximum distance that can be recorded is 99999.9 KM, SMor NM.Press SPEED to display the 3-Line Page.3-Line PageThis Speed, Depth and Temperature page is also accessed using theDEPTH key. Refer to page 49 for further information.
