Chapter 6: The Display Pages 47Deep AlarmTo display this sub-page, press ÙÙÙÙÙ once from the Shallow Alarm page,or three times from the Main Depth page.This page, and its associated Deep Alarm Adjust page, are identical tothe Shallow Alarm pages, except that they are used to display andupdate the deep alarm limit rather than the shallow alarm limit.Anchor AlarmTo display this sub-page, press ÙÙÙÙÙ once from the Deep Alarm page, orÚÚÚÚÚ from the Main Depth page.D3048-1This page shows the current settings for the upper and lower valuesthat will set off an anchor alarm or, if the alarm has been turned off, thetext “ALARM OFF”. The units are the same as those for the Main Depthvalue.Press and hold ÚÚÚÚÚ and ÙÙÙÙÙ together for three seconds to toggle thealarm either from off to on or from on to off.For detailed information on using and setting alarms, refer to Chapter 5.
