| 
Network setup_ 6Installing the UNIX printer driver packageInstallation procedure is common for all variants of UNIX OS mentioned(See "UNIX" on page 3).1.From the Samsung website, download and unpack the UNIX PrinterDriver package to your computer.2.Acquire root privileges.su -3.Copy appropriate driver archive to the target UNIX computer.See administration guide of your UNIX OS for details.4.Unpack the UNIX printer driver package archive.For example, on IBM AIX use the following commands.cd /tmpgzip –dc /cdrom/unix/packages/aix_power/aix_power.tar.gz | tar–xvf –The “binaries” folder consists of binz, install, share files and folders5.Copy the “binaries” folder to any local folder.6.Change to the driver’s “binaries” directory.cd aix_power/binaries7.Run the install script../installinstall is the installer script file which is used to install or uninstall theUNIX Printer Driver package.Use “chmod 755 install” command to give the permission to theinstaller script.8.Execute the “. /install –c” command to verify install results.9.Run ‘installprinter’ from the command line. This will bring up the AddPrinter Wizard window. Setup the printer in this window referring theprocedure next.On some UNIX OS, for example on Solaris 10 just addedprinter may not be enabled and/or may not accept jobs. In thiscase run the following two commands on the root terminal:accept enable Uninstalling the printer driver packageThe uninstalling printer utility should be used to delete the printerinstalled in the system.a)Run “uninstallprinter” command from the terminal.It will open the Uninstall Printer WizardThe installed printers are listed in the drop-down listb)Select the printer to be deleted.c)Click Delete to delete the printer from the system.d)Execute the “. /install –d” command to uninstall the wholepackage.e)To verify uninstall results, execute the “. /install –c” command.To reinstall it again, use the command “. /install” to reinstall the binaries.Setting up the printerTo add the printer to your UNIX system, run ‘installprinter’ from thecommand line. This will bring up the Add Printer Wizard window. Setupthe printer in this window according to the following steps:1.Type the name of the printer.2.Select appropriate printer model from model list.3.Enter any decsription corresponding to the type of the printer in theType field. This is optional.4.Specify any printer description in the Description field. This isoptional.5.Specify printer location in the Location field.6.Type the IP address or DNS name of the printer in the Device textboxfor network-connected printers. On IBM AIX with jetdirect Queuetype only DNS name is possible, numeric IP address is not allowed.7.Queue type shows the connection as lpd or jetdirect in thecorresponding list box. Additionally usb type is available on SunSolaris OS.8.Select Copies to set the number of copies.9.Check the Collate option to receive copies already sorted.10.Check the Reverse Order option to receive copies in the reverseorder.11.Check the Make Default option to set this printer as default.12.Click OK to add the printer.IPv6 ConfigurationTCP/IPv6 is supported properly only in Windows Vista or higher.If the IPv6 network seems to not be working, set all the network settingto the factory defaults and try again (See "Restoring factory defaultsettings using SyncThru™ Web Service" on page 3).To use the IPv6 network environment, follow the next procedure to use theIPv6 address:1. Connect your machine to the network with a network cable.2. Turn on the machine.3. Print a Network Configuration Report from the machine’s controlpanel that will check IPv6 addresses.a)Press Menu on the control panel.b)Press the up/down arrow to highlight Network and press OK.c)Press the up/down arrow to highlight Network Info. and pressOK.4. Select Start > Control Panel > Hardware and Sound > Printers > AddPrinter.5. Click Add a local printer on the Add Printer windows.6. Follow the instruction on the window.If the machine does not work in the network environment, activateIPv6. Refer to the next section followed by.Activating IPv61. Connect your machine to the network with a network cable.2. Turned on the machine.3. Press Menu on the control panel.4. Press up/down arrow to highlight Network and press OK.5. Press up/down arrow to highlight TCP/IP (IPv6) and press OK.6. Press up/down arrow to highlight IPv6 Activate and press OK.7. Press up/down arrow to highlight On and press OK.On is set as a default.8. Turn the machine off and turn it on again.9. Print a Network Configuration Report from the machine’s controlpanel that will check IPv6 addresses.1.Press Menu on the control panel.2.Press up/down arrow to highlight Network and press OK.3.Press up/down arrow to highlight Network Info. and press OK. |
