Samsung CLX-6220FX User Manual

Also see for CLX-6220 Series: Quick install guide Troubleshooting User guide

Contents

Media and tray_ 7machine’s fusing temperature for 0.1 second. Check your machine’sspecification to view the fusing temperature about 170°C(338 °F).• Used paper ink must be non-flammable and should not adversely affectmachine rollers.• Before you load used paper, verify that the ink on the paper is dry.During the fusing process, wet ink can come off used paper, reducingprint quality.Photo• Make sure not to use the inkjet photo paper with this machine. It couldcause damage to the machine.Glossy photoLoad one paper to the multi-purpose tray at a time, glossy side facingdown.• Recommended media: Glossy paper (Letter) for this machine by HPBrochure Paper (Product: Q6611A) only.• Recommended media: Glossy paper (A4) for this machine by HPSuperior Paper 160 glossy (Product: Q6616A).Matte photoLoad one paper to the multi-purpose tray at a time, side to be printedfacing down.Setting the paper size and typeAfter loading paper in the paper tray, set the paper size and type using thecontrol panel. These settings will apply to copy and fax modes. Forcomputer printing, select the paper size and type in the application programyou use on your computer (See "Opening printing preferences" on page 2).The settings made from the machine driver override the settings onthe control panel.Setting the paper size1. Press Menu on the control panel.2. Press the up/down arrow to highlight System Setup and press OK.3. Press the up/down arrow to highlight Paper Setup and press OK.4. Press the up/down arrow to highlight Paper Size and press OK.5. Press the up/down arrow to select the paper tray you want and pressOK.6. Press the up/down arrow to select the paper size you want.7. Press OK to save the selection.8. Press Stop/Clear to return to ready mode.If you want to use special-sized paper-such as a billing paper, selectCustom in the Paper tab in the Printing Preferences (See "Openingprinting preferences" on page 2).Setting the paper type1. Press Menu on the control panel.2. Press the up/down arrow to highlight System Setup and press OK.3. Press the up/down arrow to highlight Paper Setup and press OK.4. Press the up/down arrow to highlight Paper Type and press OK.5. Press the up/down arrow to select the paper tray you want and pressOK.6. Press the up/down arrow to select the paper type you want.7. Press OK to save the selection.8. Press Stop/Clear to return to ready mode.Setting the paper source1. Press Menu on the control panel.2. Press the up/down arrow to highlight System Setup and press OK.3. Press the up/down arrow to highlight Paper Setup and press OK.4. Press the up/down arrow to highlight Paper Source and press OK.5. Press the up/down arrow to highlight Copy Tray or Fax Tray and pressOK.6. Press the up/down arrow to select the paper tray you want.7. Press OK to save the selection.8. Press Stop/Clear to return to ready mode.If you want to use special-sized paper-such as a billing paper, selectEdit.. in the Paper tab in the Printing Preferences (See "Openingprinting preferences" on page 2).Selecting an output locationThe surface of the output tray may become hot if you print a largenumber of pages at once. Make sure that you do not touch thesurface, and do not allow children near it.The printed pages stack on the output tray, and the output support will helpthe printed pages to align. For the output support to correctly align thepages, you need to pull it out appropriately depending on the paper size.1 Output support2 Extension•If paper coming out of the output try has problems, such as excessivecurl, try printing to the rear door.•If the output support is incorrectly adjusted, printed pages may bemis-aligned or fall.