Samsung CLX-6220FX User Manual

Also see for CLX-6220 Series: Quick install guide Troubleshooting User guide

Contents

Scanning_ 4Samsung Scan and Fax Manager > Quick Scan.Scanning originals and sending via SMB/FTP(Scan to server)You can scan an image and send it to a total of five destinations via theSMB or FTP.Setting up an FTP serverTo use an FTP server, you need to set up parameters to access the FTPservers using SyncThru™ Web Service.1. Turn your networked computer on and open the web browser.2. Enter your machine's IP address as the URL in a your web browser.3. Click Go to access the SyncThru™ Web Service.4. Click Login on the upper right of the SyncThru™ Web Service website.A log-in page appears.5. Type in the ID and Password then click Login.If it’s your first time logging into SyncThru™ Web Service, type in thebelow default ID and password.•ID: admin•Password: sec000006. Click Address Book > Individual.7. Click Add.8. Check the box next to Add FTP.9. Enter the server address in dotted decimal notation or a host name.10. Enter the server port number, from 1 to 65535.The default port number is 21.11. Check the box next to Anonymous if you want the FTP server to permitaccess to unauthorized people.This box is unchecked by default.12. Enter the Login Name and Password.13. Enter the Path for saving the scanned image.14. Click Apply.Setting up an SMB serverTo use an SMB server, you need to set up parameters for access to SMBservers using SyncThru™ Web Service.1. Turn your networked computer on and open the web browser.2. Enter your machine's IP address as the URL in a your web browser.3. Click Go to access the SyncThru™ Web Service.4. Click Login on the upper right of the SyncThru™ Web Service website.A log-in page appears.5. Type in the ID and Password then click Login.If it’s your first time logging into SyncThru™ Web Service, type in thebelow default ID and password.•ID: admin•Password: sec000006. Click Address Book > Individual.7. Click Add.8. Check the box next to Add SMB.9. Enter the server address in dotted decimal notation or a host name.10. Enter the server port number, from 1 to 65535.The default port number is 139.11. Enter the server address in dotted decimal notation or a host name.12. Check the box next to Anonymous if you want to permit unauthorizedpersons to access the SMB server.This box is unchecked by default.13. Enter the Login Name and Password.14. Enter the Domain. If your server is joined to the certain domain, and youare using the domain account to log in, enter the domain name.Otherwise, just enter your computer name which is registered to theSMB server.15. Enter the Path for saving the scanned image. The folder (e.g. ScannedImages) must be setup on the root and the folder properties need to besetup as a share, with you listed as having user rights to the folder.16. Click Apply.Scanning and sending to SMB/FTP server1. Make sure that your machine is connected to a network.2. Load originals face up into the document feeder, or place a singleoriginal face down on the scanner glass.3. Press (Scan/Email) on the control panel.4. Press the up/down arrow to highlight Scan To SMB or Scan To FTP,and press OK.5. Press the up/down arrow to highlight the server and file share requiredthen press OK.6. Press the up/down arrow until the scan format you want is highlightedand press OK.The machine begins scanning and then sends the scanned image to thespecified server.Setting authentication for authorized userIf you have connected your machine to a network and set up the networkparameters correctly, you can scan and send images over the network.To send a scanned image through email or via network server safely, youmust register account information of authorized users to your local machineusing SyncThru™ Web Service.Registering local authorized users1. Turn your networked computer on and open the web browser.2. Enter your machine's IP address as the URL in your web browser.3. Click Go to access the SyncThru™ Web Service.4. Click Security > User Access Control > User Authentication.5. Select Local Authentication in the Authentication Method section.6. Click Apply.7. Click OK in the modifying confirmation pop-up window.8. Click User Profile.9. Click Add.10. Enter User Name, Login ID, Password, E-mail Address and FaxNumber.You need to enter the registered user ID and password in the machinewhen you start scanning to email from the control panel.11. Click Apply.