Call Functions 44– Touch Mute again to unmute the microphone. The green line will turngrey when Mute is not activated.• Headset connects to a Bluetooth headset.– Touch Headset during a call to activate a Bluetooth headset. A greenline will appear under the Headset button.– Touch Headset again to de-activate the Bluetooth headset. The greenline will turn grey when the Headset is not activated.• Touch for more options:– Contacts: allows you to go to your Contact list.– Memo: allows you to jot down a memo during a call.– Noise Reduction On/Off: allows you to turn on the Noise Reductionfeature when you are in a noisy area. Turn it Off when not needed toconserve battery power.Placing a Call on HoldYou can place the current call on hold at any point during aconversation. You can also make another call while you have acall in progress if your network supports this service.1. While on a call, touch Hold . This action places thecurrent caller on hold (which is displayed on-screen as agreyed-out box).2. You can later reactivate this call by touching Resume.To make a new call while you have a call in progress1. Touch .2. Touch Add call to display the dialer.3. Enter the new number and touch .Once connected, the active call will appear in a green boxand the call on hold will appear in a gray box.Switching Between CallsWhen you have an active call and a call on hold, you may switchbetween the two calls, changing the one on hold to active andplacing the other on hold.1. Touch Swap.The current call (caller #2) is placed on hold and theprevious call on hold (caller #1) is then reactivated so thatyou can continue conversing with that person. The activecall will appear in a green box.2. Press to end the currently active call.i897 Vegas.book Page 44 Monday, July 19, 2010 12:26 PM
