86WPS allows you to push buttons instead of entering a networkname and wireless security PIN.1. From the Home screen, tap Settings Wirelessand network Wi-Fi settings.2. Tap WPS button connection.3. Press the WPS button on your Wi-Fi access point within 2minutes.Bluetooth settingsIn this menu you can activate Bluetooth, view or assign a devicename, activate your phone so other Bluetooth devices candiscover it, or scan for other, available Bluetooth devices withwhich to pair.Activating Bluetooth From the Home screen, tap Settings Wirelessand network Bluetooth settings and tap Bluetooth to turnit on.Note: Bluetooth must be enabled prior to use.Device Name1. Activate Bluetooth. For more information, refer to “TurningBluetooth On and Off” on page 116.2. From the Home screen, tap Settings Wirelessand network Bluetooth settings and tap Device name. Theassigned device name displays.3. Press to erase the current device name and enter anew name for this device using the keyboard.4. Press OK to confirm your setting.Visible From the Home screen, tap Settings Wirelessand network Bluetooth settings and tap Visible.The phone is now activated for discovery for 119 secondsso you can pair with another device. After 119 seconds thephone becomes invisible again.Scan DevicesThis option allows you to scan for active Bluetooth devices so youcan pair with them.1. From the Home screen, tap Settings Wirelessand network Bluetooth settings and tap Scan devices.Your phone begins scanning and lists any discovereddevices in the Bluetooth devices section.2. Tap a device name to pair with the device.
