Samsung OfficeServ 7400 Technical Manual

Also see for OfficeServ 7400: System administration guide User guide User instructions General description General description

Contents

OfficeServ 7400 PROGRAMMINGTECHNICAL MANUAL PART 2 JUNE 2006MMC: 305 ASSIGN FORCED CODEDESCRIPTION:This MMC allows only one of the four options to be selected; the assignment ofaccount code with verification, account code without verification, authorizationcodes, or none on a per-station basis or on an all-station basis. The systemsupports 500 authorization codes and 999 account codes that are verified whenaccount codes verified is selected. If account codes without verification are selected,then there will be no table used.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLFEATURE KEYS0 NONE No Account or Authorization code required (NOT forcedstrictly voluntary).1 AUTHORIZE Forces user to enter a valid four digit Authorization codelisted in AUTHORIZATION CODE. Table (MMC 707).2 ACCT VERIFIED Forces user to enter a valid account code listed inACCOUNT CODE Table (MMC 708).3 ACCT NO VERIFIED Forces user to enter an account code but this code isNOT verified. User can make up any code (any accountcode up to 12 digits including ∗ and #).ACTION DISPLAY1. Press TRANSFER 305Display shows[201] FORCD CODENONE2. Dial station number ( e.g., 205)OR[205] FORCD CODENONEPress UP or DOWN key to select station andpress RIGHT soft key to move cursor.