Samsung OfficeServ 7400 Technical Manual

Also see for OfficeServ 7400: System administration guide User guide User instructions General description General description

Contents

OfficeServ 7400 PROGRAMMINGTECHNICAL MANUAL PART 2 JUNE 2006MMC: 21005 DISA MOH :OFFWhen this option is turned ON outside parties will heartrunk MOH instead of dial tone from the time the systemanswers a DISA trunk until the caller dials a digit. Systemdefault is OFF.06 TRANSFER MOH :OFFWhen this option is turned ON outside parties will heartrunk MOH instead of ring back tone from the time atransfer is completed until the call is answered by aninternal party. System default is OFF.08 DID BSY ROUT :OFFWhen this option is turned on a DID call directed to a busystation will reroute to the operator if camp on is set to OFFin MMC 714. If the option is set to ON the call will re routeto the destination in MMC 406 for that trunk.09 ALARM MOH: OFF When ON allows stations to hear MOH after answering analarm reminder call.13 RECALL PICKUP :ONWhen this option is turned on a call recalling to a stationcan be picked up using Direct Call Pickup, Pickup Groupand My Group features. This applies to held calls recallingand transferred calls recalling to a station.14: ICM EXT FWD :OFFWhen this option is on call forward external is allowedwhen intercom calls are placed to a station that has CallForward External programmed and set.16: DID ERR TONE :OFFThis option was added to provide error tone when aninvalid DID number is received. The OfficeServ 7400 errortone should not be sent to the public network in the USA.24 TRSF CANCEL :OFFWhen turned OFF a single line phone will be able tohandle 2 calls simultaneously. Using the hook-flash totoggle between them. When turned ON a single linetelephone will be able to connect to the 2 nd call, butpressing the h/f will not toggle between the two calls it willdisconnect the 2 nd call and reconnect the single linetelephone to the first call.32 ISDN PROGCON:OFFThis option, when ON, determines if the system will waitfor an answer signal before allowing DTMF to be sent onan ISDN circuit. (L Version Only)36 DSS KEY DPU :OFFWhen set to ON, the station can make a directed callpickup, by pressing the flashing DSS key of the ringingstation.37 BEGN DGT DSP :ONWhen ON and an outside call is made via speed dial orLNR where more than 11 digits are dialed, then only thefirst 11 digits dialed are shown on the keyphone display.When OFF, the last 11 digits are displayed.