Samsung OfficeServ 7400 Technical Manual

Also see for OfficeServ 7400: System administration guide User guide User instructions General description General description

Contents

OfficeServ 7400 PROGRAMMINGTECHNICAL MANUAL PART 2 JUNE 2006MMC: 110FEATURES DESCRIPTION12 CID REVIEW ALLIf this setting is set to OFF the CID reviewlist will only store CID information for callsthat were not answered at the station andreject the information for calls that wereanswered. When set to ON all calls will bestored in the list.13 SECURE OHVAWhen set to OFF an OHVA will be heardthrough the keyset speaker rather than thehandset.14 NOT FOR USA15 AUTO ANS COWhen set to ON CO lines programmed toring that keyset directly will auto answer ifthe keyset is programmed for auto answerin MMC 103.16 ENBLOCK 2LCDFor ITP Phones with 2 Line DisplaySet to ON will require user to press SENDbutton to make a call, it works like a cellphone. Enblock dialing must be enabled inMMC 861.17 STN NO RING When ON all incoming calls will not ring atstations.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1. Press TRANSFER 110Display shows[201] STN ON/OFFAUTO HOLD :OFF2. Dial the option number from above list(e.g., 4)[201] STN ON/OFFHOT KEYPAD :OFFORPress UP or DOWN to select the option andPress the RIGHT soft key to move the cursor.3. Press UP or DOWN to select ON or OFFPress the left or right soft key to return to[201] STN ON/OFFHOT KEYPAD :ONstep 2