Samsung OfficeServ 7400 Technical Manual
Also see for OfficeServ 7400: System administration guideUser guideUser instructionsTechnical manualGeneral description
                                                                                                                                                               | |
Contents
|
OfficeServ 7400 INSTALLATIONTECHNICAL MANUAL PART 6 MAY 20106.3ORDERING A T1The following information may be useful when ordering T1 service from the telephonecompany.PARAMETERS supported on OfficeServ all TEPRI cardsFRAMING T1 Circuit PRI CircuitSuper Frame (D4 56K Frame) Yes Not SupportedExtended Super Frame (ESF 64K Frame) Yes YesCODING T1 Circuit PRI CircuitAMI - 56K Coding Yes Not SupportedB8ZS - ESF 64k Coding Yes YesNFAS (Non Facility Associated Signaling) Not Supported Not SupportedUse MMC 808 to set the parameters to match the Telco T1 span.T1/E1/PRI PortPin No. 1 2 3 4 5 6 7 8T1/PRIFunctionRx+ Rx- - Tx+ Tx- - - -E1Function NOT SUPPORTED IN USAFigure 6.2 RJ-45 Port of TEPRI/TEPRIA/TEPRI26.2.3 Connecting a SIP TrunkThere is no physical SIP trunk card required to use the SIP trunking service. However, in orderto use the SIP trunking service, the OfficeServ system must be IP-enabled. That means thatthe OfficeServ system must have an MGI card with the latest MP software and have highspeed Internet connection.Please refer to the “OfficeServ Series SIP Trunking Quick Reference Document” forconfiguration.T1/PRI Port(RJ-45) |
Related manuals for Samsung OfficeServ 7400
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine