Samsung OfficeServ 7400 Technical Manual
Also see for OfficeServ 7400: System administration guideUser guideUser instructionsTechnical manualGeneral description
                                                                                                                                                               | |
Contents
|
OfficeServ 7400 INSTALLATIONTECHNICAL MANUAL PART 3 MAY 20103.57SETTING UP THE SVMI-20E WITH THE OFFICESERV 7400 PHONESYSTEMThis section provides the additional steps required to set up the SVMi-20E card for operationin the OfficeServ 7400 system. Included here is information regarding the software set up forthe phone system.After inserting the SVMi-20E card and turning the power on there are some important systemoptions that should be set in order for the SVMi-20E to function correctly. These steps areperformed in the phone system program. It is necessary to perform these at this time so thatthe SVMi-20E will initialize properly and synchronize its mailbox database with that of the keysystem.SYSTEM PROGRAMMINGReview and perform the following programming steps 1 through 7. It is necessary to performthese at this time so that the SVMi-20E will read these MMCs and initialize accordingly.NOTE: Before moving forward if you want to change any of the SVMi-20E default Extensionand Mailbox settings it is best to edit your Extension and Mailbox Templates now beforeinitializing the SVMi-20E.1. MMC 601: All SVMi-20E ports installed must be assigned to the last station group (bydefault the last group number is 5049). This should be identified as Bi-VMS group type byOSM or Installation Tool.2. MMC 601: Select either SEQUENTIAL or DISTRIBUTED ring mode (Sequential isrecommended).3. MMC 207: Confirm that all SVMi-20E ports are set for VMAA use. This will be doneautomatically. You are just confirming at this point.4. MMC 406: If you are using the SVMi-20E for Auto Attendant use MMC 406 to set thedesired trunk(s) to ring station group 5049.5. MMC 102: If you are using the SVMi-20E for Voice Mail make sure that all desired stationsare forwarded to station group 5049 for the appropriate call forward conditions: No-Answer, Busy, and/or ALL.6. MMC 740: Set “MBX Download” is to YES.7. MMC 741: Select "NO" for each station that you DO NOT want to create a mailbox for. |
Related manuals for Samsung OfficeServ 7400
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine