Samsung OfficeServ 7400 Technical Manual
Also see for OfficeServ 7400: System administration guideUser guideUser instructionsTechnical manualGeneral description
                                                                                                                                                               | |
Contents
|
OfficeServ 7400 INSTALLATIONTECHNICAL MANUAL PART 7 MAY 20107.23METAL CONNECTOR CLIP7B / SINGLE LINE ULTRA BASE WEDGE AOM ULTRA BASE WEDGE7B/SINGLE LINE ULTRA BASE WEDGE 64BM ULTRA BASE WEDGEMETAL CONNECTOR CLIPFigure 7.24 Attaching 7B/Single Line to AOM or to 64BMATTACHING iDCS 14 BUTTON MODULES TO AN iDCS KEYSETTo add an iDCS 14 Button Key Strip to your iDCS keyset, follow these steps (see Figure 7.25):1) Place the keyset face down on a flat surface.2) Remove the base pedestal by placing your thumbs over the attachment clips and pressoutward while simultaneously pressing down on the keyset body with your fingertips.3) Remove the ribbon cable knockout from the bottom of the keyset.4) Clip the 14 button strip to the side of the keyset.5) Plug one end of the ribbon cable into the keyset and the other end into the 14 buttonstrip.6) Place the support bracket over the ribbon cable and secure with the six screws provided.7) Reattach the base pedestal. |
Related manuals for Samsung OfficeServ 7400
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine