OfficeServ 7400 INSTALLATIONTECHNICAL MANUAL PART 7 MAY 20107.22METALCONNECTORCLIP24B / 12B ULTRA BASE WEDGE AOM ULTRA BASE WEDGEGROOVE FORADDITIONALCONNECTORCLIPFigure 7.23 Attaching 24B/12B to AOMATTACHING iDCS 64 BUTTON MODULES TO AN iDCS KEYSETFirst, remove the base wedge from the iDCS 64BM and attach the bracket to it with two of thescrews provided (see Figure 7.24).Remove the base wedge of the keyset and place it to the right of the 64BM and attach thebracket/64BM to the keyset with the remaining two screws.The base wedge can now be replaced.NOTE: If you wish to attach two 64BMs to a keyset, connect the 64BMs together first andthen attach them to the keyset.
