Samsung OfficeServ 7400 Technical Manual
Also see for OfficeServ 7400: System administration guideUser guideUser instructionsTechnical manualGeneral description
                                                                                                                                                               | |
Contents
|
OfficeServ 7400 INSTALLATIONTECHNICAL MANUAL PART 3 MAY 20103.43The components on the front panel of the GPLIMT board have the functions below:Table 3.19 Ports and LEDs of the GPLIMTPorts & LEDs Function DescriptionP1~P12 Ports that connect to the 10/100 Base-T EthernetP13, P14 Ports that connect to the 10/100/1000 Base-TX GbE (Gigabit Ethernet)Left LED of P1~P6 First LED: Indicates if the P1~P6’s link is operating- On: When the link is operating, LED is turned on into green color- Blink: When each port is active, the LED is blinkingSecond LED: Indicates whether the P1~P6 are operating in 10/100 Base-Tmode- Off: In operation as 10 Base-T- On: In operation as 100 Base-TXRight LED of P1~P6 First LED: Indicates if the P7~P12’s link is operating- On: When the link is operating, LED is turned on into green color- Blink: When each port is active, the LED is blinkingSecond LED: Indicates whether the P7~P12 are operating in 10/100 Base-T mode- Off: In operation as 10 Base-T- On: In operation as 100 Base-TXLNK LED - Turns on if the Giga port P13~P14’s link is connected- Blinks if the corresponding ports are activeSPD LED Indicates whether the Giga ports P13~P14 are operating in 10/100/1000Base-T mode- Off: In operation as 10 Base-T- On: In operation as 100 Base-TX- Blink: The ports are operating in 1000 Base-TX modeRST Button for resetting the GPLIMT board |
Related manuals for Samsung OfficeServ 7400
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine