Samsung SGH-S508 User Manual

Contents

Samsung SGH-S508 User Manual Manual pdf 44 page image

Call Records84Delete all (Menu 2.4)You can delete all of the numbers, selectivelydepending on the record types or all together.When a confirming message appears press the Yessoft key to confirm. Otherwise, press the No softkey.Call time (Menu 2.5)This option lets you view the timers for calls madeand received.Notes:• If your SIM card supports the ALS feature, you mustfirst select the appropriate line.• The actual time invoiced for calls by your serviceprovider may vary, depending on network features,rounding-off for billing purposes and others.The following timers are available:Last call time: the length of the last call.Total sent: the total length of all calls made sincethe timer was last reset.Total received: the total length of all callsreceived since the timer was last reset.You can use the Reset timers option to reset thecall timers; you must enter the phone passwordand then press the Ok soft key.Note: The password is preset to “00000000.” Tochange this password, see page page 95.Call Records85Call costs (Menu 2.6)This feature lets you view the cost of calls.Notes:• This feature is not intended to be used for billingpurposes.• AOC (Advice Of Charge) information may display inIdle mode, depending on your SIM card or serviceprovider.The following options are available:Last call cost: cost of the last call made.Total cost: total cost of all calls made since thecost counter was last reset. If the total cost exceedsthe maximum cost set via the Set max costoption, you can no longer make any calls until youreset the counter.Max cost: maximum cost set via the Set max costoption (see below).Reset counters: option used to reset the costcounter; you must first enter your PIN2 (seepage 144) and then press the Ok soft key.Set max cost: option used to enter the maximumcost that you authorise for your calls; you must firstenter your PIN2 (see page 144) and then press theOk soft key.Price/Unit: option used to set the cost of one unit;this price per unit is applied when calculating thecost of your calls; you must first enter your PIN2(see page 144) and then press the Ok soft key.