PLC-XF1000 Expand Serial Command Functional Specifications52/729.6 Video Status Read Command9.6.1 CR_SERSYS CommandCommand “CR_SERSYS” [CR]Details Get currently selected signal.Value only when Input is video. (Invalid when Input is computer)Acceptable “000_%1” [CR]%1“1080I60”--------------- 1080i 60Hz“1080I50” -------------- 1080i 50Hz“1035I” ----------------- 1035i“720P60” --------------- 720p 60Hz“720P50” --------------- 720p 50Hz“575P” ----------------- 575p“480P” ------------------ 480p“575I” ------------- 575i (includes composite signal such as PAL)“480I” -------------480i (includes composite signal such as NTSC)“NO_SIGNAL” --------------- There is no signalResponseUnacceptable “?” [CR]9.7 Input Read Command9.7.1 CR_INPUT CommandCommand “CR_INPUT” [CR]Details Get selected INPUT No.Acceptable “000_%1” [CR]%1 “1” – “4”ResponseUnacceptable “?” [CR]9.7.2 CR_SOURCE CommandCommand “CR_SOURCE” [CR]Details Get selected SourceAcceptable “000_%1” [CR]%1“DIGITAL” --------------------- DVI Input is selected“ANALOG --------------------- ANALOG RGB is selected“VIDEO” ----------------------- Video Input is selected“S-VIDEO” -------------------- S-VIDEO Input is selected“YPBPR” ---------------------- Y/Pb/Pr Input is selected“SDI1” -------------------------- DF-SDI1 Input is selected“SDI2”---- ---------------------- DF-SDI2 Input is selected“HDCP” ----------------------- HDCP Input is selected“SCART” ---------------------- SCART Input is selected“HDWL” ----------------------- HD data wireless input is selected“BLANK” ---------------------- without Source (LAN card)“NOCARD” --------------------- There is no board insertedResponseUnacceptable“Error Code” [CR] -------------- When command is invalid in thegiven condition (such as being selected input)“?” [CR] --------- When unknown command is received