Sanyo PLC-XF1000 - 12000 Lumens Manual

Also see for PLC-XF1000: Brochure & specs Owner's manual Technical information Owner's manual Manual

Contents

PLC-XF1000 Expand Serial Command Functional Specifications57/729.8 Screen Status Read Commands9.8.1 CR_SCREEN CommandCommand “CR_SCREEN” [CR]Details Get currently selected screen image sizeAcceptable “000_%1” [CR]%1“NORMAL” ---------------------- Normal mode“WIDE” --------------------------- Wide mode“FULL” --------------------------- Full mode“TRUE” --------------------------- True mode“CUSTOM” ----------------------- Custom modeResponseUnacceptable“Error Code” [CR] -------------- When command is invalid in thegiven condition (such as being selected input)“?” [CR] ----------------------- When unknown command is received9.8.2 CR_KYSTNMODE CommandCommand “CR_KYSTNMODE” [CR]Details Get setting status of Keystone Store ModeAcceptable “000_%1” [CR]%1 “STR” ---------------------- Store mode is “Store”“RST” ---------------------- Store mode is “Reset”ResponseUnacceptable “?” [CR] -------------------- When unknown command is received9.8.3 CR_CEIL CommandCommand “CR_CEIL” [CR]Details Get setting status of CeilingAcceptable “000_%1” [CR]%1 “ON” --------------------------- Ceiling projection is enabled“OFF” ------------------------- Ceiling projection is disabledResponseUnacceptable “Error Code” [CR]9.8.4 CR_REAR CommandCommand “CR_REAR” [CR]Details Get setting status of Rear functionAcceptable “000_%1” [CR]%1 “ON” --------------------------- Rear projection is enabled“OFF” ------------------------- Rear projection is disabledResponseUnacceptable “Error Code” [CR]9.8.5 CR_VSCALE CommandCommand “CR_VSCALE” [CR]Details Get setting status of V scaleAcceptable “000_%1” [CR]%1 “-32”－”035”ResponseUnacceptable “Error Code” [CR]9.8.6 CR_VPOS Command