Sanyo PLC-XT20K Owner's Manual

Contents

14Part Names and Functionsotyq STAND-BY buttonTurn the projector off (p.26).t ON buttonTurn the projector on (p.25).y INPUT 1 – 3 buttonsSelect an input source (INPUT 1 – INPUT 3)(pp.34–35).u AUTO PC buttonAutomatically adjusts the computer image to itsoptimum setting (pp.31, 39).i FREEZE buttonFreeze the picture on the screen (p.31).o POINT ed 7 8 ( VOLUME + / – ) buttons– Select an item or adjust the value in the On-Screen Menu (p.27).– Pan the image in Digital zoom + mode (p.51).– Adjust the volume level (with Point 7 8 buttons)(p.30).rRemote Control!0ui!1q!2 L-CLICK buttonActs as the left mouse button for wireless mouseoperation (p.17).e SIGNAL EMISSION indicatorLights red while the laser beam is being emittedfrom the laser light window or a signal is being sentfrom the remote control to the projector (p.16).!0 PRESENTATION POINTER buttonMove a pointer of the projector or a pointer forwireless mouse operation (pp.16–17).To ensure safe operation, observe thefollowing precautions:– Do not bend, drop, or expose the remote control tomoisture or heat.– For cleaning, use a soft dry cloth. Do not apply benzene,thinner, splay, or any other chemical materials.e!2w WIRED REMOTE jackConnect the remote control cable (not supplied) tothis jack when using as a wired remote control.!1 INFO. buttonDisplay the input source information (p.29).wr LASER LIGHT windowA laser beam is emitted from here (p.16).