Sanyo PLC-XT20K Owner's Manual

Contents

29Basic OperationThe following lens operation can be made with the Lensbutton on the top control.Press the Lens button to enter each lens operation mode.The selected adjustment display appears on the screen.Operating with Projector ControlDisplay “Lens shift” on the screen. Use the Point ed7 8buttons to position the screen to the desired pointwithout having picture distortion.The screen can be moved up or down to 50 percent, orsideways up to 15 percent from the central axis of thelens shift.Lens Shift Adjustment✔Note:•The arrow disappears at the maximum lens shift in eachdirection.Display “Zoom” on the screen. Use the Point ed buttonsto zoom in and out the image.Zoom AdjustmentDisplay “Focus” on the screen. Use the Point ed buttonsto adjust focus of the image.Focus AdjustmentInformation display can be used to confirm the currentoperating condition of the projector and the signal beingprojected through the projector.Press the INFO. button on the top control or remote controlto display the information window on the screen. To hidethe information window, press the INFO. button again orPoint 7 8 buttons.The information window can also be selected from themenu.Top ControlMENUbuttonLENSbuttonPOINTbuttonsINFO.buttonLens OperationInformation Information MenuInformation MenuZOOMFOCUS* The H- and V-sync freq. values described in this figuremay be different from the actual values.