Sanyo PLC-XT20K Owner's Manual

Contents

41Computer AdjustmentUse the Point 7 8 buttons to adjust the horizontal areadisplayed by this projector.Display area HUse the Point 7 8 buttons to adjust the vertical areadisplayed by this projector.Display area VResetStoreExit the PC Adjust Menu.QuitTo store the adjusted data, select Store and then press theSELECT button. Move the red arrow pointer to one of theModes 1 to 10 in which you want to store, and then pressthe SELECT button.To reset the adjusted data, select Reset and press theSELECT button. A confirmation box appears and then select[Yes]. All adjustments will return to their previous figures.Mode freeVacant Values of “Total dots,”“Horizontal,” “Vertical,”“Display area H,” and“Display area V.”Close this dialog box.To clear the stored data, select Mode free and then pressthe SELECT button. Move the red arrow pointer to theMode that you want to clear and then press the SELECTbutton.✔Notes:•Display area (H/V) cannot be selected when 480i, 575i, 480p,575p, 720p, 1035i, or 1080i is selected in the PC System Menu(p.38).•PC Adjust Menu cannot be selected when Input 1[RGB (PC digital)]is selected in the Input Menu (p.35).Move the red frame pointer tothe desired item and press theSELECT button.To clear the adjusted dataThis Mode hasstored parameters.To store the adjusted data