Sanyo PLC-XT20K Owner's Manual

Contents

51Screen AdjustmentSelect Digital zoom +. The On-Screen Menu disappears and“D. zoom +”appears. Press the SELECT button to expandthe image size. Use the Point ed7 8 buttons to pan theimage. The Panning function can work only when the imageis larger than the screen size.You can also enter the Digital zoom + mode by pressing theD.ZOOM button on the remote control.To exit the Digital zoom +/– mode, press any button exceptthe D.ZOOM, SELECT, and Point buttons.To return to the previous screen size, select a screen sizefrom the Screen Menu or select an input source from theInput Menu (p.35) again, or adjust the screen size with theD.ZOOM buttons on the remote control.Digital zoom +Select Digital zoom –. The On-Screen Menu disappears and“D. zoom –” appears. Press the SELECT button to compressimage size.You can also enter the Digital zoom - mode by pressing theD.ZOOM button on the remote control.Digital zoom –For zooming in and out the imagesWideProvide the image to fit the screen size.NormalTrueProvide the image in its original size. When the originalimage size is larger than the screen size (1024 x 768), theprojector enters to the panning mode automatically. Use thePoint ed7 8 buttons to pan the image. When adjusted,the arrows will turn red. When reached to the correctionlimits, the arrows will disappear.Provide the image to fit the wide video aspect ratio (16:9)by expanding the image width uniformly. This function canbe used for providing a squeezed video signal at 16:9.Full screenProvide the full screen image.✔Notes:•The projector cannot display any resolution higherthan 1600 x 1200. If your computer’s screenresolution is higher than that, lower the resolutionbefore connecting to the projector.•The image data other than 1024 x 768 ismodified to fit the screen size in initial mode.•True, Full screen, and Digital zoom +/– cannot beselected when 480i, 575i, 480p, or 575p isselected in the PC System Menu (p.38).•The panning function may not be operatedproperly if the stored Mode in the PC AdjustMenu is used (pp.39–41).•The minimum compression ratio can be limiteddepending on the input signal or when theKeystone function is working.•Digital zoom +/– cannot be selected when Fullscreen or True is selected.•The Screen Menu cannot be operated when720p, 1035i, or 1080i is selected in the PCSystem Menu (p.38).Screen Size Adjustment (Computer Signals)Select the desired screen size that conforms to the input signal source.Move the red frame pointerto the desired function andpress the SELECT button.Screen MenuScreen Menu icon