Sanyo PLC-XT20K Owner's Manual

Contents

21NOTE ON THE POWER CORDAC power cord must meet the requirements of the country where you use the projector.Confirm the AC plug type with the chart below and proper AC power cord must be used.If supplied the AC power cord does not match your AC outlet, contact your sales dealer.To power cordconnector on yourprojector.Projector side AC outlet sideGroundTo the AC outlet.(120 V AC)For Continental EuropeFor the U.S.A. and CanadaThis projector uses nominal input voltages of 100–120 V or200–240 V AC and it automatically selects the correct inputvoltage. It is designed to work with single-phase powersystems having a grounded neutral conductor. To reduce therisk of electrical shock, do not plug into any other type ofpower system.If you are not sure of the type of power being supplied,consult your authorized dealer or service station.Connect the projector with all peripheral equipment beforeturning the projector on.CAUTIONFor safety, unplug the AC power cord when the projectoris not in use. When the projector is connected to an outletwith the AC power cord, it is in stand-by mode andconsumes a little electric power.Connecting the AC Power CordConnect the AC power cord (supplied) to theprojector.The AC outlet must be near this equipmentand must be easily accessible.For the U.K.To the AC outlet.(200–240 V AC)To the AC outlet.(200–240 V AC)Installation