38Computer AdjustmentThe Auto PC Adjustmentfunction operates to adjustthe projector.PC System MenuThe PC System Menu iconSelected system isdisplayed.Systems in this dialog boxcan be selected.Press the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to the PC System Menu icon.Use the Point ed buttons to move the red arrowpointer to the desired system and then press theSELECT button.12Custom Mode (1–10) set in thePC Adjust Menu (pp.40–41).PC system can also be selected manually.Computer System SelectionThis projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, orUXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, thisprojector automatically detects the signal format and tunes to project a proper image without any additionalsettings. (Signal formats provided in this projector are shown on pages 75–76.)One of the following messages may appear when:The projector cannot recognize the connectedsignal conforming to the provided PC Systems.The “Auto” is displayed on the System Menubox and the Auto PC Adjustment function worksto display proper images. If the image is notprojected properly, a manual adjustment isrequired (pp.40–41).There is no signal input from the computer.Check the connection between your computerand the projector. (See “Troubleshooting” onpage 69.)Auto-----The preset system is manually adjusted in thePC Adjust Menu. The adjusted data can bestored in Mode 1–10 (pp.40–41).Mode 1PC Systems provided in this projector is chosen.The projector chooses a proper system providedin the projector and displays it.SVGA 1Selecting Computer System Manually*Mode 1 and SVGA 1 are examples.PC System Menu