37Computer AdjustmentAdjust the computer screen.This projector has various types of signal formats to automatically tunes to mostcomputers. With these signal formats in the projector and the Auto PC Adjustmentfunction, no special setting is required and you can enjoy the images in computersjust by connecting the computer to the projector.If you need to adjust the computer screen, adjust the setting by following thischapter. You can also store the adjusted parameters in the projector and call them uplater when needed. Maximum 10 memory areas (Mode 1–10) are available.*Some adjustments may not available with the digital video signals (AV HDCP) input.HELPFUL HINTS!We frequently receive inquiries about computer connections. If the computer screenis not displayed properly, check the following matters once again.● Is your computer cable connected to the projector’s INPUT 1 or INPUT 2terminals properly?● Are the projector’s input terminal and the connected computer signal selectedproperly with the INPUT 1 or INPUT 2 buttons on the remote control or by theOn-Screen Menu?● Is the signal correctly output from your computer? Many of the laptop computersneed to change the setting for monitor output when connecting to the projector.
