Sanyo PLC-XT20K Owner's Manual

Contents

55SettingCaptureThis function enables you to capture an image beingprojected to use it for a starting-up display or interval ofpresentations.Select Capture and press the SELECT button.A confirmation box appears and select [Yes] to capturethe projected image.After capturing the projected image, go to the Logo selectfunction and set it to “User”. Then the captured imagewill be displayed the next time you turn on the projectoror when you press the NO SHOW button (see page 32).To cancel the Capture function, select [No].Select [Yes] to capturethe projected image.Select [Yes] tostop capturing.CaptureLogo selectThis function decides on the starting-up display fromamong following options.User ......... Show the image you capturedDefault ..... Show the factory-set logoOff............ Show the countdown display onlyLogo (Logo and Logo PIN code lock settings)This function allows you to customize the screen logo withLogo select, Capture, and Logo PIN code lock functions.Logo✔Note:•When “On” is selected in the Logo PIN code lock function, Logoselect and Capture functions cannot be selected.✔Notes:•Before capturing an image, select “Standard” in the ImageMenu to capture a proper image (p.44).•A signal from a computer can be captured up to XGA (1024 x768). A signal from video equipment can be captured exceptfor 720p, 1035i, and 1080i.•When capturing the image that has been adjusted by theKeystone function, the adjusted data is automatically reset andthe projector captures an image without keystone correction.•When the Logo PIN code lock function is set to “On,” theCapture function cannot be selected.•When starting to capture a new image, the previously storedimage is cleared even if you cancel the capturing.