39Computer AdjustmentAuto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Verticalpositions to conform to your computer.Move the red frame pointer to AutoPC Adj. and press the SELECT button.“Please wait...” appears while theAuto PC adjustment is in process.PC Adjust MenuPC Adjust Menu iconTo store adjustment parametersThe adjusted parameters from the Auto PC Adjustment canbe stored in the projector. Once the parameters are stored,the setting can be done just by selecting a Mode (1–10) inthe PC System Menu (see page 38). See also “Store” onpage 41.✔Notes:•Fine sync, Total dots, Horizontal and Vertical position of somecomputers cannot be fully adjusted with the Auto PC Adjustmentfunction. When the image is not provided properly with thisoperation, manual adjustments are required (pp.40–41).•The Auto PC Adjustment cannot be operated when 480i, 575i,480p, 575p, 720p,1035i, or 1080i is selected in the PC SystemMenu (p.38), or when the signal is coming from the DVI-terminal.Auto PC AdjustmentPress the MENU button to display the On-ScreenMenu. Use the Point 7 8 buttons to move the redframe pointer to the PC Adjust Menu icon.12 Use the Point ed buttons to move the red framepointer to Auto PC Adj. and then press the SELECTbutton twice.Auto PC Adj.The Auto PC adjustment function can be operated directlyby pressing the AUTO PC button on the remote control.AUTO PC buttonDirect OperationMenu OperationRemote Control