Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Also see for PLC-XU116: Dimensional drawing Specification sheet Manual Manual Brochure

Contents

5Menu BarFor detailed functions of each menu, see “Menu Tree” on pages 72-73.Basic OperationMain Menu Sub-Menu Image selectFor computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green),Colorboard and image 1 - 4 (p.37).For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) ,Colorboard and Image 1- 4 (p.44). Image adjustFor computer source, used to adjust computer image [Contrast, Brightness, Color temp , white balance (R/G/B),Sharpness and Gamma] (pp.38-39).For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp , white balance (R/G/B), Sharpness, Gamma, Noise reduction and Progressive] (pp.45-46). PC adjustSelect Auto PC adj , Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjustthe parameters to match with the PC input signal format (p.33-36). ScreenFor computer source, used to adjust size of the image [ Normal, True, wide, Full, Custom and Digital zoom +/–](pp.39-40).For Video source, used to set size of image [Normal, wide and Custom] (p.47). InputUsed to select an input source from Computer 1, Computer , Video, S-video or Network (pp.31-32, 41-42). SoundUsed to adjust the volume or mute the sound (p.28). InformationDisplay the input source information: Input, H-sync freq , V-sync freq , Screen, Language, Lamp status, Lampcounter, Power management, Key lock, PIN code lock and Remote control (p.62). GuideThe key operation is displayed. SettingUsed to set the projector’s operating configurations (pp.48-61). NetworkSee the owner’s manual of “Network Set-up and Operation”.