Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Also see for PLC-XU116: Dimensional drawing Specification sheet Manual Manual Brochure

Contents

6Safety InstructionsOpenings in the cabinet are provided for ventilation. Toensure reliable operation of the product and to protect itfrom overheating, these openings must not be blockedor covered.CAUTIONHot air is exhausted from the exhaust vent. When usingor installing the projector, the following precautionsshould be taken.– Do not put any flammable object or spray can near theprojector, hot air is exhausted from the air vents.– Keep the exhaust vent at least 3’ (1 m) away from anyobjects.– Do not touch a peripheral part of the exhaust vent,especially screws and metallic parts. These areas willbecome hot while the projector is being used.– Do not put anything on the cabinet. Objects put on thecabinet will not only get damaged but also may causefire hazard by heat.Cooling fans are provided to cool down the projector.The fans’ running speed is changed according to thetemperature inside the projector.Air CirculationExhaust Vent(Hot air exhaust)Air Intake VentCAUTION IN CARRyING OR TRANSPORTINGTHE PROjECTOR– Do not drop or bump the projector, otherwise damagesor malfunctions may result.– When carrying the projector, use a suitable carryingcase.– Do not transport the projector by courier or any othertransport service in an unsuitable transport case. Thismay cause damage to the projector. For informationabout transporting the projector by courier or any othertransport service, consult your dealer.– Do not put the projector in a case before the projectoris cooled enough.Moving the ProjectorWhen moving the projector, replace the Lens Cap andretract adjustable feet to prevent damage to the lensand cabinet.When the projector is not in use for an extended period,put it into the supplied carrying case with the lens sideup.CAUTIONThe carrying case (supplied) is intended for protectionagainst dust and scratches on surface of the cabinet,and it is not designed to protect an appliance fromexternal forces. Do not transport the projector by courieror any other transport service with this case, otherwisethe projector can be damaged. When handling theprojector, do not drop, bump, subject it to strong forces,or put other things on the cabinet.Air Intake VentAir Intake Vent