3Computer InputChoose Computer (RGB(PC digital)) or Computer (RGB(AV HDCP)) by pressing the INPUT button on thetop control or press the COMPUTER button on the remote control.Before using these buttons, correct input source should be selected through Menu operation as describedbelow.Input Source Selection (RGB(PC digital), RGB(AV HDCP))Direct OperationMenu Operation13Input MenuVGAPress the MENU button to display the On-ScreenMenu. Use the Point ▲▼ buttons to select Input andthen press the Point ► or the SELECT button.Use the Point ▲▼ buttons to select Computer andthen press the Point ► button to access the submenuitem.Use the Point ▲▼ buttons to select RGB(PC digital)or RGB(AV HDCP) and then press the SELECTbutton.ComputerNote:• HDCP (High-bandwidth Digital Content Protection) isa system for protecting digital entertainment contentdelivered by DVI (Digital Visual Interface) from beingcopied. The specification of HDCP is decided andcontrolled by Digital Content Protection, LLC. Should thespecification be changed, this projector may not displaythe digital content protected by HDCP.• When the Input Search function is set to On1 or On,the input signal will be searched automatically (p.49).COMPUTER buttonRemote ControlComputer1 ((RGB) /(Component) / (Scart))Computer (RGB(PC digital) /RGB(AV HDCP) / RGB(Analog))Top ControlINPUT button VideoS-videoComputer (RGB(PCdigital) / RGB(AV HDCP) /RGB(Analog))NetworkComputer1 ((RGB) /(Component) / (Scart))