Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Also see for PLC-XU116: Dimensional drawing Specification sheet Manual Manual Brochure

Contents

3Computer InputImage Select MenuIMAGE buttonDynamicRealImage 1Image Image 3Image Mode SelectionImage 4Blackboard(Green)StandardRemote ControlIMAGE buttonSelect the desired image mode among Dynamic, Standard,Real, Blackboard (Green), Colorboard, Image 1, Image ,Image 3 and Image 4 by pressing the IMAGE button on theremote control.StandardPicture mode with improved halftone for graphics.RealBlackboard (Green)Image 1–4DynamicDirect OperationFor viewing pictures in a bright room.Normal picture mode preset on the projector.For viewing with the user preset image mode in the Imageadjust Menu (see pages 38-39). This Image memory isprovided in each computer, component and video inputsource.1Menu OperationColorboardUse the Point ▲▼ buttons to select Colorboard and thenpress the Point ► or the SELECT button. Use the Point▲▼ buttons to select the desired item and then press theSELECT button.At the time of simple projection on the colored wall, youcan get the close color image to the color image projectedon a white screen by selecting the similar color to the wallcolor from the preset four colors.Press the MENU button to display the On-Screen Menu.Use the Point ▲▼ buttons to select Image select andthen press the Point ► or the SELECT button.Use the Point ▲▼ buttons to select the desired itemand then press the SELECT button.For the image projected on a blackboard.This mode helps enhance the image projected on ablackboard. This is mainly effective on a green coloredboard, not truly effective on a black colored board.Colorboard