Sanyo PLC-XU116 - 4500 Lumens Owner's Manual

Also see for PLC-XU116: Dimensional drawing Specification sheet Manual Manual Brochure

Contents

40Computer InputSelect Digital zoom +. The On-Screen Menu disappears andD zoom + appears. Press the SELECT button to expand theimage size. Use the Point ▲▼◄► buttons to pan the image.The Panning function can work only when the image is largerthan the screen size.A projected image can be also expanded by pressing theD.ZOOM + button on the remote control.To exit the Digital zoom +/– mode, press any button exceptthe D.ZOOM +/- buttons, SELECT and Point buttons.Digital zoom +Select Digital zoom -. The On-Screen Menu disappearsand D zoom – appears. Press the SELECT button tocompress image size.The projected image can be also compressed by pressingthe D.ZOOM - button on the remote control.To return to the previous screen size, select a screen sizefrom the Screen Size Adjustment Menu or select an inputsource from the Input Source Selection Menu (see pages31-32) again or adjust the screen size with the D.ZOOM +/-buttons.For zooming in and out the imagesNote:• The panning function may not operateproperly if the stored Mode in the PC adjustMenu is used (p.36).• The minimum compression ratio is limiteddepending on the input signal, when theKeystone function is working or when thecustom is selected for the screen size.• True, Full and Digital zoom +/– can not beselected when 480i, 55i, 480p or 55p isselected in the PC System Menu (p.33).• Digital zoom +/- can not be selected whenFull or True is selected.• Digital zoom – can not be operated whenCustom is selected.Remote ControlD ZOOM + buttonPOINT buttonsSELECT buttonD ZOOM - buttonAdjust the screen scale and position manually with thisfunction.Press the Point ►button at Custom and the Custom isdisplayed on the screen, you can use the Point ▲▼ buttonsto choose the item you want to adjust.Scale H/V .......... Adjust the Horizontal/Vertical screenscale.H&V ................... When set to On, the aspect ratio is fixed.Scale V appears dimmed and becomesunavailable. Adjust Scale H, then thescreen scale is automatically modifiedbased on the aspect ratio.Position H/V ..... Adjust the Horizontal/Vertical screenposition.Common ........... Save the adjusted scale to all the inputs.Press the SELECT button at Commonto display a confirmation box. To savethe scale, press the SELECT buttonat yes. When Custom is selected, thesaved scale is used.Reset ................. Reset the all adjusted values. Pressthe SELECT button at Reset to displaya confirmation box. To reset, press theSELECT button at yes.CustomNote:• When no signal is detected, Normal is setautomatically and the Aspect dialog boxdisappears.• The adjustable range for Scale H/V andPosition H/V is limited depending on the inputsignal.Digital zoom -Custom