Sanyo PLC-XU88 Owner's Manual

Also see for XU88 - PLC XGA LCD Projector: Owner's manual Owner's manual Specification sheet Specification sheet Specification sheet

Contents

1PRESENTATION POINTERbuttonR-CLICK buttonL-CLICK buttonWhile pressing the MENUbutton, press the IMAGEbutton number of timescorresponding to the remotecontrol code.MENU buttonIMAGE buttonRESET/ON/ALL-OFFswitchRemote Control CodeRemote Control Code Number of TimesPressing IMAGEButtonCode 1 1Code Code Code Code 5 5Code 6 6Code 7 7Code 8 8wireless Mouse OperationThe remote control can be used as a wireless mouse for your computer.Acts as left (click) mousebutton while the projectorand a computer areconnected with a USBcable.Move the pointer on the screenwith this button.Acts as right (click) mousebutton while the projector and acomputer are connected with aUSB cable.The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remotecontrol codes prevents interference from other remote controls when several projectors or video equipmentnext to each other are operated at the same time. Change the remote control code for the projector first beforechanging that for the remote control. See “Remote control” in the Setting Menu on page 52.Press and hold the MENU and IMAGE buttons formore than five seconds to switch between the codes.The code switches sequentially for one pressing theIMAGE button. See the list below.1To initialize the remote control code, slide the RESET/ON/ALL-OFF switch to “RESET,” and then to “ON.” Theinitial code is set to Code 1.Part Names and FunctionsBefore operating the wireless mouse, connectyour computer and the projector with a USBcable (not supplied). See “Connecting to aComputer” on page 18. When the Pointerfunction is used, the wireless mouse is notavailable.1When a USB cable is connected to thecomputer and the projector, turn on theprojector first, then the computer. If you turnon the computer first, the wireless mousefunction may not operate correctly.