Computer InputPC Adjust MenuManual PC AdjustmentSome computers employ special signal formats which may not be tuned by Multi-scan system of this projector.Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. Theprojector has five independent memory areas to store those parameters manually adjusted. It allows you torecall the setting for a specific computer.Press the MENU button to display the On-ScreenMenu. Use the Point ◄► buttons to move the redframe pointer to the PC Adjust Menu icon.1 Use the Point ▲▼ buttons to move the red framepointer to the desired item and then press the SELECTbutton to display the adjustment dialog box. Use thePoint ◄► buttons to adjust the setting value. Move the red frame pointerto the desired item and pressthe SELECT button.PC Adjust Menu iconPress the SELECT buttonhere to adjust other items.Use the Point ◄► buttonsto adjust the value.Status (Stored/Free) of theselected Mode.Selected ModePress the SELECT button atCurrent mode to show theinformation of the connectedcomputer.Use the Point ◄► buttons to adjust the value, eliminating aflicker from the image displayed (from 0 to 31).Fine syncUse the Point ◄► buttons to adjust the number of total dotsin one horizontal period to match your PC image.Total dotsUse the Point ◄► buttons to adjust the horizontal pictureposition.HorizontalUse the Point ◄► buttons to adjust the vertical pictureposition.VerticalPress the SELECT button to show H-sync freq. and V-syncfreq. of the connected computer.Current modeUse the Point ◄► buttons to adjust the clamp level. Whenthe image has dark bars, try this adjustment.Clamp