6LanguageThe language used in the On-Screen Menu is available inEnglish, German, French, Italian, Spanish, Portuguese,Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,Russian, Chinese, Korean, and Japanese.Set the red framepointer to the itema n d p r e s s t h eSELECT button.Press the SELECT buttonat Language, then theLanguage Menu appears.Setting Menu (Language)Setting Menu iconSettingSettingAuto setupThis function enables Auto Keystone correction and Auto PCadjustment by pressing the AUTO SETUP/CANCEL buttonon the top control or the AUTO SET/CANCEL button on theremote control. Settings for those functions can be alteredas follows:Auto PC AdjOn. . . Enables Auto PC Adjustment when pressingthe AUTO SET/CANCEL button on the remotecontrol or the AUTO SETUP/CANCEL buttonon the top control.Off. . . Disables Auto PC Adjustment.Auto KeystoneAuto....Always works and corrects keystone distortionaccording to the projector's tilt.Manual... Works only when pressing the AUTO SET/CANCEL button on the remote control or theAUTO SETUP/CANCEL button on the topcontrol.Off. . . Disables Auto Keystone.Notes:• Auto PC Adj. and Auto Keystone cannot be set "Off" at thesame time.• Auto Keystone corrects vertical distortion only, not correcthorizontal distortion.• The Auto Keystone cannot work when Ceiling feature is set"On" in the Setting menu (p.50).• Perfect correction of the image distortion cannot be ensuredwith the Auto setup function. If the distortion is not correctedproperly by pressing the AUTO SETUP/CANCEL orAUTO SET/CANCEL button, adjust manually by pressingthe KEYSTONE button on the remote control or selectingKeystone in the Setting menu (pp.25, 47).• Fine sync, Total dots, Horizontal and Vertical position ofsome computers cannot be fully adjusted with the AutoPC Adjustment function. When the image is not providedproperly with this operation, manual adjustments are required(pp.33–34).Auto setupSelect Auto setup and thisbox appears. Choose thedesired setting for Autokeystone and Auto PC adj.with the Point ◄► buttons.Press the SELECT buttonhere to display the otherlanguages.Press the MENU button to display the On-ScreenMenu. Use the Point ◄► buttons to move the redframe pointer to the Setting Menu icon.1 Use the Point ▲▼ buttons to move the red framepointer to the desired item and then press the SELECTbutton. The Setting dialog box appears.This projector has a Setting menu that allows you to set upthe other various functions described below.