Computer InputAuto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Verticalpositions to conform to your computer.Move the red frame pointerto Auto PC Adj. and pressthe SELECT button.“Please wait...” appearswhile the Auto PCadjustment is in process.PC Adjust MenuPC Adjust Menu iconAuto PC AdjustmentRemote ControlAUTO PC buttonThe Auto PC adjustment function can be operated directlyby pressing the AUTO PC button on the remote control.Direct OperationTo store adjustment parametersThe adjusted parameters from the Auto PC Adjustment canbe stored in the projector. Once the parameters are stored,the setting can be done just by selecting a Mode (1–5) in thePC System Menu (see page 31). See also “Store” on page34.Notes:• Fine sync, Total dots, Horizontal and Vertical position ofsome computers cannot be fully adjusted with the AutoPC Adjustment function. When the image is not providedproperly with this operation, manual adjustments arerequired (pp.33–34).• The Auto PC Adjustment cannot be operated when 480i,575i, 480p, 575p, 720p,1035i, or 1080i is selected in thePC System Menu (p.31), or when the signal is comingfrom the DVI-terminal.Press the MENU button to display the On-ScreenMenu. Use the Point ◄► buttons to move the redframe pointer to the PC Adjust Menu icon.1 Use the Point ▲▼ buttons to move the red framepointer to Auto PC Adj. and then press the SELECTbutton twice.Auto PC AdjMenu Operation