Sanyo PLC-XU88 Owner's Manual

Also see for XU88 - PLC XGA LCD Projector: Owner's manual Owner's manual Specification sheet Specification sheet Specification sheet

Contents

Video InputUse the Point ◄► buttons to adjust the gamma value toobtain a better balance of contrast (from 0 to 15).GammaPress the Point ◄ button to decrease the sharpness of theimage; press the Point ► button to increase the sharpnessof the image (from 0 to 15).SharpnessAn interlaced video signal can be displayed in progressivemode. Select one of the following options.Off .......... Disabled.L1 .......... For an active picture.L2 .......... For a still picture.Film ........ For watching a film. With this function, theprojector reproduces pictures faithful to theoriginal film quality.ProgressiveNoise reductionNoise interference on the screen can be reduced. Selectone of the following options to get smoother images.Off .......... Disabled.L1 .......... Lower reductionL2 .......... Higher reductionNotes:• Noise reduction and Progressive cannot beselected when 480p, 575p, 720p, 1035i, or 1080iis selected (p.41).• Reset and Store icons will be displayed when anyadjustment is made.To store the adjusted data, select Store and press theSELECT button. Use the Point ▲▼ buttons to select onefrom Image 1 to 4 and press the SELECT button.A confirmation box appears and then select [Yes]. Storeddata can be called up by selecting an “Image (1–4)” in theImage Select Menu on page 42.To reset the adjusted data, select Reset and press theSELECT button. A confirmation box appears and then select[Yes]. All adjustments will return to their previous figures.ResetStoreExit the Image Adjust Menu.QuitImage Mode MenuMove the red framepointer to an imageitem to be set andt h e n p r e s s t h eSELECT button.Store iconA confirmation boxappears and thenselect [Yes].