Sanyo PLC-XU88 Owner's Manual

Also see for XU88 - PLC XGA LCD Projector: Owner's manual Owner's manual Specification sheet Specification sheet Specification sheet

Contents

Video InputImage AdjustmentPress the MENU button to display the On-ScreenMenu. Use the Point ◄► buttons to move the redframe pointer to the Image Adjust Menu icon.1 Use the Point ▲▼ buttons to move the red framepointer to the desired item and then press the SELECTbutton to display the adjustment dialog box. Use thePoint ◄► buttons to adjust the setting value.Press the Point ◄ button to decrease the contrast; press thePoint ► button to increase the contrast (from 0 to 63).Press the Point ◄ button to decrease the brightness; pressthe Point ► button to increase the brightness (from 0 to 63).ContrastBrightnessPress the Point ◄ button to lighten red tone; press the Point► button to deepen red tone (from 0 to 63).white balance (Red)Press the Point ◄ button to lighten green tone; press thePoint ► button to deepen green tone (from 0 to 63).white balance (Green)Press the Point ◄ button to lighten blue tone; press thePoint ► button to deepen blue tone (from 0 to 63).white balance (Blue)Use the Point ◄► buttons to select the desired Color temp.level (High, Mid, Low, or XLow).Color tempPress the Point ◄ button decrease the intensity of the color;press the Point ►button increase the intensity of the color(from 0 to 63).Press the Point ◄► buttons to adjust the tint value to get aproper color balance (from 0 to 63).ColorTintNotes:• When the White balance Red, Green, or Blue is adjusted,the Color temp. level will change to “Adj.”.• Tint cannot be selected when the video system is PAL,SECAM, PAL-M, or PAL-N (p.41).Use the Point ◄► buttons toadjust the setting value.Move the red framepointer to the desireditem and then pressthe SELECT button.Image Adjust MenuPress the SELECT buttonat this item to display otheritems.Image Adjust Menu iconPress the SELECT buttonhere to display the previousitems.